Loading the EDS 1275
So after quite a journey, researching, understanding and building a replica of Jimmy Pages EDS 1275 we are at the point of loading it....
17 views0 comments
Jimmy's twin neck replica
Well lots of wood shavings and redesigns and research and we are almost there. The necks are carved and headstocks drilled and shaped. A...
28 views0 comments
double neck Jimmy Page guitar gets its curves
We have completed the designs and machining. now the curves and contours are completed. She's looking good though. Single piece of...
12 views0 comments
'59 Les Paul Standard - custom replica build finished and delivered
Made to the exacting specification of those vintage instruments we completed the latest one and its safely with its new owner. It weighs...
51 views0 comments
EDS 1275 'Jimmy Page' replica progresses
There are literally no accurate plans for this guitar never mind the EDS 1275. Jimmy's guitar seems unusual being wider than the later...
18 views0 comments
'59 Les Paul replica
The final coats of lacquer have been applied and it's ready to be polished and aged. This is a slightly 'greened' finish with a subtle...
26 views0 comments
Building a replica of Jimmy Page's legendary twin neck
The EDS 1275 is a replica that poses challenges. There are no accurate plans. The reissues are not entirely correct to Page's guitar. So...
26 views0 comments
1962 Stratocaster replica gets aged!
We didn't want it to look like it had been used as a gardening tool but had been played and had wear as if cared for. The finish is a non...
22 views0 comments
'59 Les Paul replica into the finishing process
The maple top is protected by a thin shellac temporary coat whilst the cherry red grain filler is applied. This will all be sanded down...
33 views0 comments
29 views0 comments
